Odour Control Products.

Odour Buster air sterilizers are the versatile and effective solution to all form of indoor air pollution cleansing the environment of the germs and bacteria and lingering odors which can make life so unpleasant.

Odour Buster technology replaces other expensive and often ineffective methods of odor control such as constant fresh air replenishment with consequent heat loss or ‘deodorizing' by masking odors with artificial chemical fragrances.

Odour Buster is designed for economically effective operation with electricity consumption rated at just 25 watt. It can operate 24 hours a day with no problems. There are no costly and harmful chemical to replace and minimal maintenance is required.

 

Odour Buster is a scientific breakthrough in odor control, the most effective method known today of eliminating unpleasant odors in toilet and washroom, sports changing rooms , locker rooms, hospital sluice rooms, food processing such as supermarket, etc.

 

Odour Buster Offer an odor free environment and powerful protection against germs in commercial, industrial toilets and washrooms. The fresh and clean smelling atmosphere is always greatly appreciated by patrons.

 

Applications for Odour Buster Air sterilizer

  Toilets
Gymnasium
Dining Areas
Offices
Pet Shops
Home
Food Preparation Area
Pub
Hair Saloon
Hospitals
Laboratories
All other indoor facilities

Odour Buster is a powerful oxidant and bactericide which destroys organic molecules in the air. It has a very short life span and in ambient temperatures, it will only last 20 to 30 minutes before it returns to ‘normal' oxygen, O2. It is a suicidal molecule; it looks for a contaminant to attack, “oxidizes” it, destroying itself in the process.

 

TECHNICAL SPECIFICATION

Weight 1.2Kgs
Width 140mm
Length 300mm
Height 115mm
Power Consumption 25Watts
Stainless steel Housing  
DM Type - UV Ozone Device UV Ozone Treatment For Kitchen Exhaust:
UVi –Aire DM Type Duct Mounted UV Ozone Lamps are designed for easy mounting to exhaust ducts or treatment chambers. The ballast and sensor boards are kept out of the air stream. Lamps can be easily replaced via the ballast /sensor board housing.

Design Criteria: For optimum performance, the contact time for air treatment with the duct/chamber should be approximately 0.1 to 0.2 second .IUVC Ozone is also a scientific breakthrough in odour and grease control, the most effective method known today for eliminating unpleasant odours and grease oil in processing areas. However, in cases where a lot so smoke is generated during the cooking process such as chargrilling, the use of an industrial electronic or electrostatic precipitator (EP) is recommended.
Specifications
Model No Input Voltage Lamp power Lamp Length Pilot Light BMS Signal
DM-O3-24 230 Volts AC 24 Watts 330mm Yes Yes
DM-03-36 230 Volts AC 36 Watts 400mm Yes Yes
  • Ballast/Sensor housing size is 220mm x 200mm x 120mm Thick (max. Dimension).
  • Multiple units may be required depending on airflow and duct configuration.
  • Lamp life are rated for 9000 hours.
  • All DM units are equipped with Indicator light and a set ofDry contact (NO/NC) terminals for Building Management System (BMS) applications. Lamp function can therefore be monitored remotely.
 

2005-2006 Airverclean Pte Ltd. All Rights Reserved. Designed by www.rpigroup.com