Airverclean Pte Ltd.

UVC Germicidal Irradiation for Air Handling Units (Commercial).
ALTRU-V (V-Flex)
HIGH-INTENSITY UV SURFACE AND AIR STREAM DISINFECTION SYSTEM.
THE VIRTUES OF CLEANER AIR
Damp, dark HVAC systems are the perfect breeding ground for mold and bacteria. Each time the HVAC system runs, these contaminants and airborne viruses are circulated throughout the building. Research has shown that building occupants exposed to such contaminants can develop health issues, including sinus congestion and headaches, allergy asthma, upper respiratory ailments, along with colds and flu, and according to Mayo Clinic researchers, chronic sinus infections caused by mold. The V-Flex design allows for high UV intensity to be applied to protect the health of building occupants and technicians.
THE V ALSO STANDS FOR SAFETY AND RELIABILITY
ALTRU-V products were specifically designed for optimal performance in HVAC conditions. Every ALTRU-V product is UL-CULL Listed for specific use within an HVAC system and each is produced in an ISO 9001 certified plant for unmatched quality. Unlike other cleaning programs that can expose maintenance workers and building occupants to dangerous chemicals or toxic fumes, the V-Flex system offers a passive, non-chemical approach to continuous HVAC system maintenance. Straightforward Installation The V-Flex offers unmatched installation flexibility. It can be installed vertically (shown) or horizontally, with multiple UV modules easily attached to a support column. One electrical hook-up via a Power Junction Module is all that is needed at one end of each support column.
SPECIFICATIONS
V-FLEX UVC Fixture and Lamp Assemblies are factory assembled and tested. They consist of a Housing, Power Supply, Lamp Socket, Lamp, Mounting Extrusion, Power Module and Extrusion Mounting Bracket and are to be constructed to withstand HVAC environments. Fixtures are UL/C-UL Listed under ABQK Classifications and provide for unobstructed 360° UVC irradiance from the lamp to surfaces and the air stream. Housing is constructed of stainless steel in a UL drip-proof design that is equipped with mounting tabs to facilitate housing positioning and fastening anywhere on the Mounting Extrusion's four sides. Power to each fixture is from UL approved “plug and light” power service from the Mounting Extrusion Raceway. The Housing accommodated the Lamp Socket internally to prevent Lamp pin exposure to the air stream. The Housing incorporates all components into one integral assembly to maximize Lamp serviceability and to allow for 360° UVC irradiance from the Lamp to surfaces and the air stream.	ALTRU-V (V-Flex).
Power Supply is a Class 2, rapid start type electronic power supply that includes RF and EMI suppression. Each is supplied with power via a factory supplied Mounting Extrusion Raceway that is equipped with a UL approved and NEC compliant Power Module. The Power Supply maximizes photon production, radiance and reliability and is UL Listed for cold and/or moving air streams of 55-135°F, and 1000 fpm. Power requirement is to be 120Vac. Lamp Socket is constructed of UVC resistant, commercial grade HVAC materials designed for long service. They are protected from the air stream, enclosed in the Housing. The Lamp Socket accommodates a Lamp to provide 360° UVC irradiance to surfaces and the air stream. Lamp is a very high output, wind chill resistant, 60-Watt, T5 diameter, hot cathode, and twin tube bi-axial type equipped with a four-pin lamp base that is fully encapsulated when inserted into the Lamp Socket. The Lamp produces no less than 80% of its initial UVC out-put at its end of lamp life, or after 9000 hours of service. Each Lamp contains no more than 5.0 milligrams of mercury, to protect the environment and to provide for future EPA environmental compliance. Each lamp produces its specified output at 500 fpm in temperatures of 55-135°F. The Lamp does not produce ozone, fumes or any other contamination. Mounting Extrusion is UL Listed and constructed of Bright Anodized, 6463-T5 aluminum extrusion to withstand HVAC environments and to accommodate the fixture Housing on any of its four sides. It is designed with covered Poser Raceways to provide A/C power to each Power Supply connected to any of its four sides. The Mounting Extrusion and Power Raceway Covers are able to be field cut-to-length to accommodate most any plenum height. Power Module is UL Listed and constructed of stainless steel. It is equipped with mounting tabs to facilitate fastening to any of the Mounting Extrusion's four sides. The Power Module distributes power to each Mounting Extrusion Raceway in accordance with electrical codes. Mounting Bracket is constructed of stainless steel and designed to accommodate, hold and fasten the Mounting Extrusion to the plenum or duct base. Independent Testing: The V-Flex UVC system has been tested to verify specified performance and conformity to UL/C-UL as to Category Code ABQK (Accessories, Air Duct Mounted) and UL Standards: 153, 1598 & 1995 respectively. The health aspects associated with the use of this product and its ability to aid in the disinfection of environmental air has not been investigated by UL.