|
|
|
|
| UVC Germicidal Irradiation for Air Handling Units (Commercial). |
 ALTRU-V (V-Strike) |
EXTERNAL SYSTEM-MOUNTED ULTRAVIOLET FIXTURE. |
| APPLICATION |
The V-Strike can be installed easily onto most manufacturer’s “through the wall” or “rooftop” units as well as ducts and other equipment, and is installed from outside so there is no need to open or compromise equipment. The installation is as simple as drilling a single hole for the lamp, which is inserted from either a side mount (XS) or top mount (XT) orientation. A switch able 120V/240V power source setting and several electrical knockouts provide electrical wiring flexibility. A terminal block is included for easy power connections including those for safety interlock switches, and a 120V line cord option allows you to plug-in the system where possible and where local building codes allow. Once installed, the system locks for tamper and vandalism resistance and will withstand the elements with its strong NEMA rated design. The lamps, available in 32.5”, 28.5” and 15” sizes, can be safely replaced in minutes using the exclusive steel support lamp and bayonet mount knob. |
| Easy Installation The V-Strike is easily installed without opening or compromising the equipment. A single hole for the lamp is drilled into the HVAC unit, the V-Strike box is mounted, and the electricity is hardwired to the system. |
 |
|
SPECIFICATIONS |
UVC Lamp and fixture are factory assembled and tested. They consist of a housing, power source, one piece steel supported lamp and connector. All components are constructed to withstand typical HVAC environments. They are UL/C-UL Listed under Category Code ABQK (Accessories, Air Duct Mounted), UL Standards: 153, 1598 & 1995 respectively.
Housing is constructed of 16-gauge, powder-coated steel and is equipped with 3/4” electrical knockouts on all accessible sides to facilitate wiring to A/C power. Fixtures may be used as side (XS) or top (XT) mount as required or as shown on the plans. Each fixture incorporates all components into one integral assembly that maximizes serviceability. Fixtures shall be designed to be mounted outdoors or where necessary.
|
ALTRU-V (V-Strike). |
Power Source is an electronic, high frequency, rapid-start type with overload protection. Its standard power switching capability allows for 120/240Vac wiring and is designed to maximize photon production, radiance and reliability and shall be UL/C-UL Listed for temperatures of 55-135°F. It includes RF and EMI suppression.
Lamp Assembly and MountingThe UV Lamps are mounted in a sturdy and easy to handle assembly which mounts quickly (1/2 turn) into a specially designed socket within the enclosure. An integral plug provides power. This provides a very sturdy mount that allows for quick lamp changes.
Lamp and Connector are integrated into one unit that includes a steel support to protect the lamp before, during and after its installation and operation. The bayonet style lamp includes a rotational mounting and locking connector knob (with light pipe) that accepts lamp power via a safety plug from the power source. The lamps 0 medium bi-pin types for the VS-32-T5 and VS-28-T5. The VS-15-PLL type is a bi-axial, T5 diameter twin-tube type. Both lamps have their pins isolated from the air stream. Each achieves the specified output at 500 fpm in air temperatures of 55-135° F. They produce no ozone or other secondary contamination.
Independent Testing: ALTRU-V systems have been independently tested to verify conformance to UL/C-UL per Category Code ABQK (Accessories, Air Duct Mounted) and UL Standards: 153, 1598 & 1995 respectively.
The health aspects associated with the use of this product and its ability to aid in the disinfection of environmental air has not been investigated by UL.
|
 |
|
|
|
|
